wood ceilings

Removable suspended false wood ceilings
ASSEMBLY INSTRUCTIONS

 

 
HOME   PHOTOS   CATALOGUE   HOW TO INSTALL   INFO
 
       
       
  ASSEMBLY INSTRUCTIONS  
       
       

Required Tools and Materials

Screwdriver
Drill
Level
Tape Measure
Saw,
Hammer
Pliers
Pincers
Chuck - Plugs
Screws - Screwspikes - Screweyes
Rocker Arms - Ribs or Wire

       
 

Pieces by Tedesma System:

tej1b.jpg (11466 bytes) tej3b.jpg (16364 bytes) tej2b.jpg (12655 bytes)
Conjunto y Placas Perfil T Primario Perfil T Secundario
tej0b.jpg (7140 bytes) tej01b.jpg (8455 bytes) tej02b.jpg (7688 bytes)

  

CEILING FRAMING USING PERIMETER PLATES

Plates outlining the perimeter should aesthetically cover the entire length of the ceiling in any particular case.

Example:
A 5-metre ceiling (0.61 x 0.61 m. each)

tej941b.jpg (9638 bytes) tej942b.jpg (12255 bytes)

If we put 8 complete plates in a line we cover 4.88 metres (8 x 0.61). That’s 0.12 metres left up to 5 metres.

We should allow 12 cm. on two of the sides (or 6 cms distributed throughout  the whole perimeter).

WE’LL DO BETTER IF WE OPERATE AS FOLLOWS:

Put 7 complete plates (instead of 8) covering 4.27 metres. That leaves 73 cm to ovelayl. By so doing and distributing the remaining 73 cm, each new plate will now be 36,55 cm. 

tej931b.jpg (9836 bytes)
tej932b.jpg (11904 bytes)

CEILING HEIGHT AND SETTING OF PERIMETER OUTLINES

To install a ceiling first we make marks on the walls to show the height to which the structure will be placed. 

Then we put up the primary outlines in the walls of the perimeter.

tej95b.jpg (12477 bytes)

The outlines are placed with plugs, screws and wedges of wood, as is indicated in the figure. To do so, first holes are to be made. The corners are finished in the shape of a mitre joint or posting square.


 

PRIMARY OUTLINES SUSPENSION, CUTTING AND JOINING

Afterwards, we begin to suspend the structure with Primary T-Outlines (190cm approx.)

heperfilbbb.gif (2490 bytes)

To do so, rods or hooks are placed on the ceiling, every 61 cm., pairing their corresponding eyebolts or stretchers set on the outlines also every 61 cm. We recommend the use of a measure standard to level the ceiling.

After being suspended from the ceiling, primary outlines are joined by means of a chuck and glue. Then the secondary outlines are placed to start shaping the structure. 

tej6b.jpg (13768 bytes)

tej7b.jpg (12500 bytes)

Then the secondary outlines are placed to start shaping the structure. 

Outlines that end up being too long are cut to size so that they perfectly fit onto the perimeter, which has a tongue on the upper side to make it possible. Then they are fixed with a nail or a screw.

 
PLATE ASSEMBLING

Plates have to be placed onto the outlines as the suspended structure is being installed.

tej8b.jpg (12470 bytes) tej9b.jpg (10990 bytes) tej91b.jpg (11039 bytes) tej92b.jpg (6991 bytes)

The perimeter plates have to be cut to size.

 

REMARKS:

WHEN SETTING THE HEIGHT OF A CEILING:
The distance between the suspended ceiling and the real ceiling should be over 15 cm to facilitate the assembly.

EXPANSION JOINTS

Sometimes expansion joints are to be used due to the size of the ceiling.

These expansion joints are carried out by means of wooden fillets that are fixed with screws to a primary outline. After that, another primary outline is suspended and fit against the wooden fillet still to be fixed. 

FIXING THE PERIMETER FILLETS WITH DECORATIVE MOULDINGS:
A decorative moulding can be put setting it in the wall by means of plugs and screws. Then, the perimeter structure made up by primary outlines is set on the moulding and hung from the ceiling by means of wire or rods.

 

       
       

 

       
 
 
Wood Ceilings Tedesma  - Suspended ceilings wood - Patented System
Ctra. Minaya, s/n - 02612 MUNERA (Albacete) - SPAIN
 
 
 
 
 
 
Inicio spainCenter.org   Turismo Castilla La Mancha   Alimentos   Agricultura   Turismo España

Belleza   Educación   Artesanía   Construcción   Motor   Profesionales   Inmobiliarias   Decoración   Cuchillos   Moda   Deporte   Bodegas Vinos

Empresas Destacadas   Empresas b2b y b2c   Albacete   España   Quiénes somos   Aviso Legal   spainCenter@spainCenter.org

Publicidad, marketing y promoción de zonas geográficas, sectores de negocios y empresas
www.spainCenter.org